Fra-Ber
Fra-Ber Neve Foaming Shampoo 1L
Fra-Ber Neve Foaming Shampoo 1L
Couldn't load pickup availability
THE BENEFITS OF NEVE
Fra-Ber Neve is the active foam car shampoo ideal for pressure washers and foam lances thanks to its thick, full-bodied foam that durably adheres to the bodywork.
It is a professional product that can be used both in car washes and by car care enthusiasts in general.
Main features:
- Snow effect: when used, it creates a thick and full-bodied foam that durably adheres to the bodywork to reduce the friction of car-wash brushes or the mitt, thus minimising the formation of micro-scratches;
- Deep cleaning: it can remove all types of dirt and road contaminants;
- Carefully formulated: the product contains no added sodium hydroxide, phosphates and NTA*;
- Professional product: it is designed as a foam shampoo and can be used in all types of car wash systems be they freestanding, self-service or drive-in, tunnels etc., but also by private users;
- Suitable for all vehicles: it can be used on all types of vehicles including sports cars, utility vehicles, vans, camper vans, trucks and motorbikes;
- Multi-format: it is available in both a 1 L and 4.54 L format;
- Floral fragrance: it leaves a pleasant scent after each application.
NEVE IS IDEAL
- To experience the performance of a professional product at home;
- To enjoy the benefits of a thick and full-bodied foam during washing that adheres to the bodywork for longer for improved cleaning;
- For a more exciting car washing experience thanks to the spectacular snow effect that envelops the vehicle during washing.
HOW TO USE NEVE
We recommend using Neve as a foam shampoo for washing.
Main steps:
- Spray the foam over the entire vehicle, starting from the bottom and applying the product horizontally, gradually moving upwards. This will prevent dripping during rinsing.
- Then rinse with plenty of high-pressure water. Move in a horizontal direction from the top part of the vehicle, gradually moving downwards.
If applied with a foam gun and foam lance: dilute to a ratio between 1:2 and 1:12, i.e., use between 330 ml and 75 ml of product and top up with water (between 670 ml and 925 ml) to obtain a 1 L ready-to-use solution. During application, the actual dilution ratio may reach between roughly 1:45 and 1:195.
If applied with a pre-pressure pump or bucket: use a dilution of 1:25 to 1:50, that is, use 40 ml to 20 ml of product and fill the remainder with water (960 ml to 980 ml) to make a 1 L solution ready for use. The dilution can go up to 1:500 for frequent washing.
If used as a pre-wash detergent for weekly cleaning: use a foam gun or foam lance with a dilution ratio between pure and 1:19, i.e., use up to 50 ml of product and top up with water (950 ml) to obtain a 1 L ready-to-use solution. During application, the actual dilution ratio may reach between roughly 1:15 and 1:300.
For professional use in car washes:
- Pump: 10-40 pumpings 6 l/h pump capacity 5-40 ml consumption per cycle;
- Dosatron: 0.2-2%;
- Sprayer: 1:50 to 1:500;
- Foam lance: dilute to a ratio between 1:2 and 1:12, i.e., use between 330 ml and 75 ml of product and top up with water (between 670 ml and 925 ml) to obtain a 1 L ready-to-use solution. During application, the actual dilution ratio may reach between roughly 1:45 and 1:195.
Share
